Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2002
    Location
    london
    Posts
    70
    Rep Power
    23

    Cooling tower water pumps



    Can anyone give me any information or recommend a good read on cooling tower water pumps? I just want to know what to look for in regards pressure readings across them and flow rate calculations per size of pump etc.



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60
    Reggie, are you talking about the condenser water flow through the tower or the tower water circulating pump ?

    If it is the tower pump itself I would have thought that the flow rate is more dependent on the discharge nozzles. The pressure at the nozzle is a meaningless figure unless you know what it should be (sounds obvious I know but ...). Nozzle fouling then starts to get involved as well... and so it goes.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

Similar Threads

  1. cooling water TDS
    By afeef in forum Technical Speculations
    Replies: 1
    Last Post: 19-04-2009, 07:38 AM
  2. cooling tower without fillings
    By Lc_shi in forum Fundamentals
    Replies: 3
    Last Post: 27-12-2005, 12:55 AM
  3. Cooling tower evaporation, blowdown, makeup and cycles
    By miltbeychok in forum Industrial
    Replies: 5
    Last Post: 14-10-2005, 06:34 PM
  4. Cooling tower evaporation, blowdown, makeup and cycles
    By miltbeychok in forum Fundamentals
    Replies: 0
    Last Post: 13-10-2005, 05:14 AM
  5. Building a wine cabinet
    By Rory in forum Technical Discussions
    Replies: 38
    Last Post: 13-07-2004, 08:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •