Results 1 to 3 of 3
-
24-04-2008, 08:59 PM #1
Choosing expanison valve and solenoid
The appliance is Cooltek Condensing unit CU-22:
Cooling capacity:23,2kW
Refrigerant: R407C
Liquid pipe: 15,88mm
Gas pile: 28mm
Its for ventilation cooling. What do I have to take into consideration when choosing TXV and solenoid valve? If possible give some real examples.
Regards!
-Martin-
-
25-04-2008, 09:12 PM #2
Re: Choosing expanison valve and solenoid
Martin this appears to be a question straight out of one of your text books.
Before we do all of your study work for you what are your thoughts on the subject.
We can then comment on your decisions.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
02-05-2008, 09:51 PM #3
Re: Choosing expanison valve and solenoid
How about:
Danfoss TDEZ 26kW/7,5TR
MOP 115; Orifice no.40; -10/+15
and
Castel HM2, 8W
TU 50 C
TM 110 C
Similar Threads
-
optimum defrost gas solenoid valve setting question
By racknovice in forum Supermarket RefrigerationReplies: 3Last Post: 14-12-2007, 07:49 AM -
Solenoid valve
By vjaiswal in forum Technical DiscussionsReplies: 3Last Post: 11-12-2007, 04:32 AM -
Working of Solenoid Valve
By Mukesh in forum CommercialReplies: 25Last Post: 22-09-2006, 01:18 PM -
Whats the prefered solenoid valve location
By kengineering in forum CommercialReplies: 13Last Post: 04-02-2006, 01:58 PM