Results 1 to 21 of 21
  1. #1
    Join Date
    Nov 2006
    Location
    Poland
    Posts
    91
    Rep Power
    18

    YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required



    Dear all,

    I need an instruction of York's controller for YCUM (YCAM) 300 and YCUM (YCAM) 360. It is very important for me!
    Please, mail me this instruction: jacenty25@poczta.fm

    Thank you in advance for your help!

    Regards,

    Jacek



  2. #2
    Join Date
    Jan 2008
    Location
    Kent UK
    Age
    49
    Posts
    515
    Rep Power
    18

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Hi Jacek

    Is this any good to you.

    http://www.yorkromania.ro/docum/Pc014_gb.pdf

    Service/technical manual for ycam chillers.
    If it ain't broke, it doesn't have enough features yet.


    Damo

  3. #3
    Join Date
    Nov 2006
    Location
    Poland
    Posts
    91
    Rep Power
    18

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Quote Originally Posted by chunky munkey View Post
    Hi Jacek

    Is this any good to you.

    http://www.yorkromania.ro/docum/Pc014_gb.pdf

    Service/technical manual for ycam chillers.
    Hello,

    Many thanks for your reply! You have sent a Product Catalogue and I need a Instruction for Controller for these (YCAM/YCUM) units (I need to change settings etc.).

    Could you provide such a material for me?

    Best regards from Poland,

    Jacek

  4. #4
    Join Date
    Aug 2008
    Location
    Baltics
    Age
    62
    Posts
    786
    Rep Power
    16

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Hello!
    From what I see on the thread Jacec from Poland had not found an Instruction for the Controller for Ycam units. Now I need it too. I cannot reset hour counters for compressors. After having entered the password 1234, in Maintenance sub-menu the controllers does not accept Yes in Hour Reset Comp 1 and 2 (actually, reverse to No in 3 seconds). Hour limit is set (and is exceeded) at 25 000, the controller does not accept its enlargement also. What do I wrong? Anybody can help me?

  5. #5
    Join Date
    Mar 2001
    Location
    ireland
    Age
    53
    Posts
    1,471
    Rep Power
    41

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Yuri

    try using 4321 instead.

    al

  6. #6
    Join Date
    Dec 2005
    Location
    Johor
    Age
    62
    Posts
    151
    Rep Power
    19

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Jacek,
    I may just have the manual. Are the controllers millenium or Recip.type? Elaborate... Give me a bit of time, its in pdf form and i need to browse my library. Email me abdazman@gmail.com.

  7. #7
    Join Date
    Jul 2007
    Location
    singapore
    Posts
    18
    Rep Power
    0

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    HI,I AM LOOKING FOR ycam 600 tuv MODEL YORK AIRCOOLED CHILLER WITH 4 COMPRESSOR (REFCOMP) AT PRESENT WE DONT HAVE ANY WIRING DIGRAM ON SITE ALSO PLEASE HELP ME TO SEND MY EMAIL (yorkravi@yahoo.com.sg) awaiting your reply thanx

  8. #8
    paul plescher's Avatar
    paul plescher Guest

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    I need an instruction of York's controller for YCAM b 150
    Please, mail me this instructionlescherp@yahoo.com
    Thank you in advance for your help!
    paul

  9. #9
    Join Date
    Jul 2008
    Location
    GREECE
    Age
    50
    Posts
    6
    Rep Power
    0

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    I need a SERVICE MANUAL of York's controller for YCAM H 300 ( MILLENNIUM RECIP ) . Please, mail me this manual . info@gipairconditioning.gr
    Thanks in advance

  10. #10
    maerskengr's Avatar
    maerskengr Guest

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Please help, I need an Instruction manual for York YCAM 360 control panel. Also the symbol/notation at the panel. Thank you very much...

  11. #11
    maerskengr's Avatar
    maerskengr Guest

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    My e-mail address:

    maerskengr@yahoo.com

  12. #12
    Kanjer's Avatar
    Kanjer Guest

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Please help, I need an Instruction manual for York YCAM 240

  13. #13
    Join Date
    Jul 2009
    Location
    iran
    Age
    39
    Posts
    4
    Rep Power
    0

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    dear enginer thermoking
    I'd like pass mpc3000 thermoking
    thanks.

  14. #14
    teslareefer's Avatar
    teslareefer Guest

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Hi , I need a YCAM 240 controller manual or catalogue , I have many trouble with "external overlock" .
    Regards :

    Luis

    email to : lsantibanez@tesla.cl

  15. #15
    Join Date
    Jul 2010
    Location
    England
    Age
    66
    Posts
    5
    Rep Power
    0

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Hi all
    Having problems with YCAM 90 c/w Soft Start
    1, Manual does not show same Contacter Enclosure which includes Fan Speed Control Box.
    2, There is no reference to there being Compressor Soft Start Units on board.
    3, All versions of the Electrical Schematic are smudged, even the one on the chiller door.
    4, No Info. what so ever on the Soft Start Module & the one for Compressor 2 is doing nothing but showing a Red LED.

    Need a more Instructive Manuel or where I can get one.

    HELP !!! Andy

  16. #16
    Join Date
    Jun 2006
    Location
    england
    Age
    41
    Posts
    25
    Rep Power
    0

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Hey Chillerpax,

    Try giving York a call in basildon, i had a small problem with trying to access the controls on a different sort of York chiller using a carel controller.

    They sent me the drawings and manuals free £20 per manual, which tbh we always pass back on the client and ask them to keep on site in a safe place.

    Regards

    Matt

  17. #17
    Join Date
    Jun 2006
    Location
    england
    Age
    41
    Posts
    25
    Rep Power
    0

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    [quote=matt p;198779]Hey Chillerpax,

    Try giving York a call in basildon, i had a small problem with trying to access the controls on a different sort of York chiller using a carel controller.

    They sent me the drawings and manuals free, normally he did say they were £20 per manual, which tbh we always pass back on the client and ask them to keep on site in a safe place.

    Regards

    Matt[/quote/]

    edited for spelling.

  18. #18
    Join Date
    Jul 2010
    Location
    England
    Age
    66
    Posts
    5
    Rep Power
    0

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Hi Matt P,

    Thanks for help will look that up tomorrow.
    Did contact Johnson Controls who now own York. Put me in touch with someone who sent me through some PDFs
    But still no Electrical Schematics
    So let's see what your suggestion gleans.

    Thanks again

    [QUOTE=matt p;198781]
    Quote Originally Posted by matt p View Post
    Hey Chillerpax,

    Try giving York a call in basildon, i had a small problem with trying to access the controls on a different sort of York chiller using a carel controller.

    They sent me the drawings and manuals free, normally he did say they were £20 per manual, which tbh we always pass back on the client and ask them to keep on site in a safe place.

    Regards

    Matt[/quote/]

    edited for spelling.

  19. #19
    Join Date
    Mar 2001
    Location
    ireland
    Age
    53
    Posts
    1,471
    Rep Power
    41

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Chillerpax

    Are these older generation chillers? If i remember correctly these soft starts weren't made by York but by a french company, even Basildon had scant info on them.

    If soft start is screwed might be worthwhile scrapping it?

    Alec

  20. #20
    Join Date
    Jul 2010
    Location
    England
    Age
    66
    Posts
    5
    Rep Power
    0

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Hi Alec,

    Thanks for Info.

    Softstarts are made by FAIRFORD ELECTRONICS. Been in contact with same & have sent info in a PDF.

    Have replaced all the High Speed HRC's. Now just need to work my way through them.

    If you need any Contact Details for them then just ask.

    Thanks again,

    Andy



    Quote Originally Posted by al View Post
    Chillerpax

    Are these older generation chillers? If i remember correctly these soft starts weren't made by York but by a french company, even Basildon had scant info on them.

    If soft start is screwed might be worthwhile scrapping it?

    Alec

  21. #21
    Join Date
    Mar 2001
    Location
    ireland
    Age
    53
    Posts
    1,471
    Rep Power
    41

    Re: YORK YCUM YCAM Controller (maybe Millenium) Instruction (Manual) required

    Thanks Andy

    Good to know.

    Alec

Similar Threads

  1. York Controller Password
    By marc5180 in forum Air Conditioning
    Replies: 6
    Last Post: 29-02-2008, 07:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •