Results 1 to 3 of 3
Thread: Coolpack
-
06-04-2008, 05:15 AM #1
Coolpack
Hello,
Probably a dumb question, but does anyone know if it's possible to use Coolpack with Imperial units?
I am learning it just fine but having to convert from the "right" pressure & temperature scales to Fahrenheit & PSI takes me a long time...
-
06-04-2008, 05:34 AM #2
Re: Coolpack
If i remember correctly the CoolPack website mentioned adding IP units at some date in the future if funding became available.
If all else fails, ask for help.
-
06-04-2008, 11:05 AM #3
Re: Coolpack
.
Why not contact the authors in Denmark and ask them?
There is a link on their web site that you can use.
It is a programme that was instigated by a university in Denmark with original funding from their government, I believe.
The reality is that Imperial units are not used for anything in Europe any more, so there may not be any intention to add IP units in their programme, unless there is already a conversion built in, but they should be able to tell you for sure.
.
Similar Threads
-
Coolpack
By Mur24 in forum Tools and CalculatorsReplies: 13Last Post: 28-05-2011, 11:30 PM -
Copeland select 6
By Copman in forum Tools and CalculatorsReplies: 9Last Post: 27-05-2010, 09:01 PM -
CoolPack Cycle Input
By Bones in forum TrainingReplies: 4Last Post: 02-12-2003, 10:18 AM -
How many small strands needed to equal pipe pressure drop?
By DaBit in forum FundamentalsReplies: 17Last Post: 25-08-2003, 09:56 PM -
Coolpack
By Koudijs in forum TrainingReplies: 7Last Post: 03-01-2003, 11:15 PM