Results 1 to 16 of 16
Threaded View
-
22-07-2003, 07:50 PM #1
Ransco 7102-1 Thermal Shock Chamber cooling water requirements
I have a model Ransco model 7102-1 thermal shock chamber w/ 1 7.5HP compressor charged w/ 13 lbs of R502 and 1 7.5HP compressor charged w/ 8 lbs of R13.
The unit is 10 yrs old and no technical manuals are available from Ransco. Their technical support
group says that 13 gpm of 85 deg F water is required for compressor cooling (no idea of the discharge temp).
It would be more practical for me to supply 40-50 deg chilled water in a closed loop but they have no idea how much flow or what size cooler would be required.
Does anyone have any thoughts ??????????
Thanks,
Bill
Similar Threads
-
Cooling down the water in a 1000 liter container
By Joep Hogenhout in forum Technical DiscussionsReplies: 29Last Post: 21-04-2009, 01:27 AM -
pure water from air
By Lc_shi in forum New TechnologiesReplies: 32Last Post: 26-02-2009, 12:25 PM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum IndustrialReplies: 5Last Post: 14-10-2005, 06:34 PM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum FundamentalsReplies: 0Last Post: 13-10-2005, 05:14 AM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM