Results 1 to 6 of 6
Thread: Mould build up on beef carcass
-
26-03-2008, 04:02 PM #1
Mould build up on beef carcass
Does anyone know what causes a white fiberous mould build up on beef carcasses in a cold store after they have been hung for a few days? It doesn't seem to effect the overall quality of the beef and can easily be scraped off, but I have had quite a few of my customers ask what causes it and how I can prevent it, but I can't seem to find anything about it on the internet.
Cheers.
-
26-03-2008, 04:25 PM #2
Re: Mould build up on beef carcass
Hi Pykester1,
First thing is to take a sample and find out what it is,
Temperatures might be too high, humidity might be too high, meet was not cleaned before entering cold store,
evaporator coil is dirty, etc, etc.
Check it out.
Chemi
-
26-03-2008, 04:50 PM #3
Re: Mould build up on beef carcass
Thanks for the info.
Cheers.
-
26-03-2008, 05:01 PM #4
Re: Mould build up on beef carcass
Please download from this link now as it will be valid for 7 days.
http://download.yousendit.com/F4B3AF1022D2A430
Maybe this will be of some help to you.
-
26-03-2008, 06:55 PM #5
Re: Mould build up on beef carcass
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
31-03-2008, 01:55 AM #6
Re: Mould build up on beef carcass
mold is not unusual on dry aged beef. i should say "solid muscle" dry aged beef. it is part of the process of proper aging and some of the best restaurants in the world age their beef that way. it slowly breaks down the connective tissue in the meat making it more tender.
when i say solid muscle,,, i mean,, the mold is only on the outside of the meat because its not been cut yet. after the steaks are cut,, then they are either served right away, or cryovaced.
Similar Threads
-
Custom Refrigeration Build
By pizza_boy in forum CommercialReplies: 11Last Post: 16-10-2007, 09:06 PM