Results 1 to 4 of 4
Thread: ice machine help
-
05-03-2008, 08:53 AM #1
ice machine help
i have a problem wit ice-o-matic this machine have two plate tht dispance ice one works fine and the other just makes ice half only but one o the things tht saw at first it was tht the hot gas valve was mixing it wasent holdind the presure so i change it well still doing the same thing so now my question is tht the spansion valve could be bad two or i mest up the gas valve wen i put it on ????????????
-
05-03-2008, 09:56 PM #2
Re: ice machine help
chicoman can you give a little more detail.
It would be nice if we can help.
Are you saying that the hot gas valve was passing and despite having changed it,it still passes!
Did you change the whole valve or just the internal components.
If the latter then maybe the valve seats are damaged or worn?
I presume the coil is not energised.
Grizzly
-
06-03-2008, 02:23 AM #3
Re: ice machine help
hey chicoman,sounds like you're trying to say you're having problems with the hotgas sol valve?If you want more info on that specific ice maker,try the link below and search under the ice makers section.
When you say mixing,you meen its passing through?Yep,more info would help...
www.air-conditioning-and-refrigeration-guide.com
-
06-03-2008, 05:55 PM #4
Re: ice machine help
thx for every one who answer me back but i find the problem already and everything is working fine now the problem was the xpancion valve it wasent feeding the coil so i change tht and now it works fine
Similar Threads
-
Ice Block Machine: Hoping to start an Ice Factory. Please Help!!
By promise1 in forum CommercialReplies: 15Last Post: 02-01-2011, 02:26 AM -
Block ice machine evaporator
By Jose Rocha in forum FundamentalsReplies: 2Last Post: 07-07-2008, 03:56 AM -
Atlas Slice Ice Machine
By Glide in forum Trouble ShootingReplies: 6Last Post: 27-07-2007, 07:56 AM -
Cattabriga Ice Cream Machine
By Abe in forum Trouble ShootingReplies: 9Last Post: 26-04-2003, 01:06 PM -
Soft Serve machine won't shut off
By terrygoodrich in forum CommercialReplies: 5Last Post: 14-10-2001, 01:02 AM