Results 1 to 10 of 10
  1. #1
    UKfridge's Avatar
    UKfridge Guest

    PLEASE HELP A UK New Member!



    Hi everyone,

    I am in the UK and have a Hoover Nextra refrigerator, HNL 3505 ATL-80.

    We had to move it from inside the house to an out building.

    Now it isn't cold!

    When I open the door for a few minuites the thermostat clicks and it sounds like a motor starts at the back, but it doesn't get any colder.

    Can anyone help??

    Thanks,

    Tom



  2. #2
    Join Date
    Jul 2007
    Location
    Australia
    Age
    50
    Posts
    1,845
    Rep Power
    20

    Re: PLEASE HELP A UK New Member!

    The clicking is the compressor overload. You've either knocked something loose or stuffed it up for good up somehow.

    Turn the power off, check at the back , maybe the compressor electrical cover has been knocked, loosening the wiring. If so you wouldn't have moved stuff too much, removed the cover, check if everything is fully plugged in (the relay and overload push onto the the compressor pin terminals)
    Then resecure the terminal cover and clip, wait at least 15min before plugging back in..

    If the cover is secure and tight, leave it off for an hour then plug it in again.

    If it still does that clicking sound, you'll need to get someone out. Possibly the relay or overload had died, possibly the compressor took a few bangs in the move and is now dead.
    Last edited by paul_h; 04-04-2008 at 12:36 PM.

  3. #3
    Join Date
    Oct 2006
    Location
    England
    Posts
    1,843
    Rep Power
    21

    Re: PLEASE HELP A UK New Member!

    Quote Originally Posted by UKfridge View Post
    Hi everyone,

    I am in the UK and have a Hoover Nextra refrigerator, HNL 3505 ATL-80.

    We had to move it from inside the house to an out building.

    Now it isn't cold!

    When I open the door for a few minuites the thermostat clicks and it sounds like a motor starts at the back, but it doesn't get any colder.

    Can anyone help??

    Thanks,

    Tom
    What is the temp of the outhouse.
    If it is below 4 or 5deg C it will not cut back in because the stat thinks its cold enough.

    taz

  4. #4
    Join Date
    Mar 2008
    Location
    England
    Age
    54
    Posts
    273
    Rep Power
    17

    Re: PLEASE HELP A UK New Member!

    souns like you have damaged it in the move , either compressor down or you have broken a pipe and the gas has leaked .

  5. #5
    Join Date
    Mar 2004
    Location
    UK
    Posts
    624
    Rep Power
    21

    Re: PLEASE HELP A UK New Member!

    Hi

    Stick a thermometer in there first,as said it may be at temp.

    Regards B

  6. #6
    UKfridge's Avatar
    UKfridge Guest

    Re: PLEASE HELP A UK New Member!

    Thanks for the replys!

    It only clicks once (stat kicking in), and then the motor starts. Not a continuous clicking!

    We were very carefull in the move, and nothing was damaged, as it was only moved about 20ft!

    The temp outside can be 25 deg c and it still isnt cold!

    I will put a thermometer in there tonight and let you know what the temp is!!

    Thanks again!

  7. #7
    Join Date
    Oct 2006
    Location
    England
    Posts
    1,843
    Rep Power
    21

    Re: PLEASE HELP A UK New Member!

    Quote Originally Posted by UKfridge View Post
    Thanks for the replys!

    It only clicks once (stat kicking in), and then the motor starts. Not a continuous clicking!

    We were very carefull in the move, and nothing was damaged, as it was only moved about 20ft!

    The temp outside can be 25 deg c and it still isnt cold!

    I will put a thermometer in there tonight and let you know what the temp is!!

    Thanks again!

    Run it with a thermomiter in it and see what happens.
    When the stat cuts in does the thing get cold?
    If it does and then goes on to fail I would look to the stat (pure coinsidence that it failed at the same time).
    If it does not get cold then the problem will need looking at by sombody who has an understanding of fridges.

    Cheers taz.

  8. #8
    Join Date
    Sep 2005
    Location
    uk
    Age
    49
    Posts
    9
    Rep Power
    0

    Re: PLEASE HELP A UK New Member!

    Hi
    put your hand on top of compressor if its hot then throw your fridge in a bin......or check pipe and charging valve if you gas pressure was low, charge gas and check......90/10 %

  9. #9
    Join Date
    Sep 2003
    Location
    ISRAEL
    Age
    72
    Posts
    4,248
    Rep Power
    46

    Re: PLEASE HELP A UK New Member!

    HTML Code:
    Stick a thermometer in there
    HTML Code:
    put your hand on top

    HTML Code:
    does the thing get cold?
    HTML Code:
    you have broken a pipe
    HTML Code:
    it doesn't get any colder
    Guys, sounds like a gynecologist waiting room to me....

  10. #10
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,151
    Blog Entries
    6
    Rep Power
    36

    Re: PLEASE HELP A UK New Member!

    Quote Originally Posted by chemi-cool View Post
    HTML Code:
    Stick a thermometer in there
    HTML Code:
    put your hand on top
    HTML Code:
    does the thing get cold?
    HTML Code:
    you have broken a pipe
    HTML Code:
    it doesn't get any colder
    Guys, sounds like a gynecologist waiting room to me....
    Are you been there and waiting something? You maybe should consider to go to visit urologist in future!

Similar Threads

  1. New member
    By Dorf in forum New to RE
    Replies: 5
    Last Post: 03-06-2007, 04:58 PM
  2. New member
    By icecap in forum New to RE
    Replies: 7
    Last Post: 16-05-2007, 04:30 AM
  3. New Member
    By Freeztech in forum New to RE
    Replies: 6
    Last Post: 09-05-2007, 07:23 AM
  4. newest member
    By Gigas in forum New to RE
    Replies: 2
    Last Post: 27-09-2006, 03:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •