Results 1 to 9 of 9

Thread: training

  1. #1
    tony garbutt's Avatar
    tony garbutt Guest

    Post training



    can anyone please advise me on geting some training into repairing domestic friges I have plenty of electircal experience but would like to know how to change compresor,s and re gas them.



  2. #2
    Join Date
    Feb 2001
    Location
    Doncaster, England
    Posts
    199
    Rep Power
    25

    Re: training

    We can do that for you, no problem.

    Send me a message with your details and I will send you some information.

    I am glad to announce that we are just about to open a new Training Centre dedicated to Refrigeration and Air Conditioning.

    Its located just off the M18 Junction 3.

    We are busy setting up all of the classrooms and workshops.

    Already an approved City & Guilds and CITB Centre, we are able to offer: C&G 2078, CITB Safe Handling of Refrigerants and Pipework and Brazing, Basic Refrigeration and Air Conditioning, as well as electrical courses.

    We are having an Open Day on 2nd September 2004 anytime between 10am and 4pm. Anyone who would like to come along send me a message and I'll give you the details.
    Tony

  3. #3
    Cihuoma's Avatar
    Cihuoma Guest

    Re: training

    Dear sir
    I don't have a certificate; to back-up my skill in refrigeration, air conditioning and heating works.
    I service and fabricate units, i han been in these feild for 13 years and presently in it; i have losed a lot of substantial jobs, because of no certificate or licence to warrant such jobs to me.
    I humbly ask for admission in your training school/ workshop; for the certificate i need after the training.

  4. #4
    Join Date
    Feb 2001
    Location
    Doncaster, England
    Posts
    199
    Rep Power
    25

    Re: training

    Have a look at our wesite www.techtrain.co.uk and then contact me at info@techtrain.co.uk
    Tony

  5. #5
    edy's Avatar
    edy Guest

    Re: training

    Dear Tomy
    You may not know me ,but
    Ive just can accross this (www.techtrain.co.uk)
    I was wondering if they still need student .
    Well I am Hvac technician for more than 2 years now , graduted from PENN FOSTER carrer school (formerly ICS International) in the USA .
    Now I looking for institution that can allow me to deep more knowlegde HAVC feilds
    Please I will be needing your help .Here my email edy-dove@hotmal.com
    I working in lome (TOGO , west africa)
    hope to hear from you
    EDy

  6. #6
    Join Date
    Feb 2006
    Location
    Nha Trang
    Posts
    8
    Rep Power
    0

    Re: training

    I would like some test standards (documents) of refrigeration system (piping and equipments).
    Who can help me?
    Thanks.
    Trong Bach

  7. #7
    george148's Avatar
    george148 Guest

    Re: training

    i am george arefrigeration and air condition mechani i study pratically for a period of three years after that i do my attachment at emidan from germany after that i went to regional marinetime acadamy for a period of 6 month .i dont have a certificate only testimonia i have .i am looking for an institute that will help me deep more knowledge so that i can get job to do,pleas help me i am writing you from ghana.

  8. #8
    Join Date
    Aug 2004
    Location
    Kent /SE London
    Age
    71
    Posts
    14
    Rep Power
    0

    Re: training

    Hello Tony

    I don't know where you are situated in the country but if it is anywhere around London there is a place in Pettswood that does short courses the firms name is Lits Ltd
    their website is www.lits.org.uk they may be able to help you

    Regards

    Moris

  9. #9
    Join Date
    May 2006
    Location
    Leicestershire
    Age
    58
    Posts
    28
    Rep Power
    0

    Re: training

    Quote Originally Posted by tony garbutt
    can anyone please advise me on geting some training into repairing domestic friges I have plenty of electircal experience but would like to know how to change compresor,s and re gas them.
    The best course in the uk for domestic is LEC refrigeration, all our guys start with the basics.
    1st class grounding into refrigeration

Similar Threads

  1. Lack Of Training Centres
    By Latte in forum Training
    Replies: 12
    Last Post: 06-11-2008, 02:56 PM
  2. Training in Milton Keynes
    By viamphie in forum Training
    Replies: 12
    Last Post: 08-01-2008, 07:55 PM
  3. Training Problem.
    By dogma in forum Training
    Replies: 17
    Last Post: 03-09-2006, 11:24 AM
  4. New Training Centre
    By Tony in forum Training
    Replies: 16
    Last Post: 19-12-2004, 09:53 PM
  5. Good quality training
    By Steve in forum Training
    Replies: 0
    Last Post: 09-07-2001, 06:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •