Results 1 to 4 of 4
Thread: Hanbell RC-10 screw compressors
-
21-02-2008, 10:33 PM #1
Hanbell RC-10 screw compressors
Hi everyone,
I'm new to RE and would like some feedback. I need to replace two, 100 ton Trane recips. Looking at Hanbell RC-11 double screw machines using R-22. I was told these have been in use in the UK for years. Comments, information on reliability?
Thanks,
LarryLast edited by Larry W; 21-02-2008 at 10:42 PM.
-
22-02-2008, 01:11 AM #2
Re: Hanbell RC-10 screw compressors
RC line screw compressor have been introduced on the market 4 or 5 years ago. They are produced in China by Hanbell Machinery.
I installed 4 RC-15L in the past and had no problems.
-
22-02-2008, 11:55 AM #3
Re: Hanbell RC-10 screw compressors
RC series comps. are very silent & simple construction
-
22-02-2008, 04:04 PM #4
Re: Hanbell RC-10 screw compressors
I went to the Hanbell website, but could not find a recommended preventive maintenance or service schedule for these units. Such as oil change intervals.
Similar Threads
-
Bitzer Screw Compressors
By Davezz in forum Industrial CompressorsReplies: 9Last Post: 09-02-2008, 09:32 PM -
reciprocating compressors vs screw, for NH3
By lraja in forum IndustrialReplies: 15Last Post: 04-03-2007, 02:30 AM -
refcom screw compressors
By fitter in forum Industrial CompressorsReplies: 3Last Post: 11-11-2006, 02:01 PM -
I Need some BIG USED Screw compressors
By bruceboldy in forum IndustrialReplies: 0Last Post: 16-06-2006, 12:06 AM -
Variable speed screw compressors
By Friobernal in forum Industrial CompressorsReplies: 1Last Post: 14-11-2004, 09:28 AM