Results 1 to 4 of 4
-
18-10-2010, 08:49 AM #1
Mycom compaund compressor. How to select?
Dear Sirs
could you help me select compaund compressor (for example N2520) . I use mycom selection program and specify superheating temperature 5 K, subcooling in condenser (evaporativ VXC) 0 K.
My be I should to indicate other parametrs too?
Regards
-
19-10-2010, 06:27 PM #2
Re: Mycom compaund compressor. How to select?
[quote=Garri_Grom;206937]Dear Sirs
could you help me select compaund compressor (for example N2520) . I use mycom selection program and specify superheating temperature 5 K, subcooling in condenser (evaporativ VXC) 0 K.
My be I should to indicate other parametrs too?
Regards
My friend you need a lot more information like BHP and more loads.
-
21-10-2010, 02:00 PM #3
Re: Mycom compaund compressor. How to select?
Thermo23 thank you. I make not correct question.
Can You help me about follow situation:
We what to install compaund compressor N2520 it will be work -40(evaporation)/+35 (condensation). Q=397 kW. But some times (about half an year) we need only Q=200 kW.
I do not know how to do it more better:
1. frequency regulator for the motor 315 kW
2. multiplicator
3. or better to use Vi without 1 and 2.
In 1 variant i don understand what the main disadvantages and what power economy.
If possible could you help me?
-
28-07-2011, 08:59 PM #4
Re: Mycom compaund compressor. How to select?
has this been sorted out? I can size it for you if you require.
Similar Threads
-
Mycom question and Manuals (Compound two stage)
By henry.zhang in forum IndustrialReplies: 16Last Post: 23-12-2010, 11:07 PM -
Mycom Compressors - Metric or SAE
By Willymcghee in forum Industrial CompressorsReplies: 3Last Post: 20-02-2010, 02:45 AM -
Mycom relief valve issue?
By Mojjee in forum IndustrialReplies: 32Last Post: 15-05-2009, 03:26 AM -
mycom 4wb unloading problem
By samlee12 in forum IndustrialReplies: 13Last Post: 19-01-2009, 10:21 PM -
Oil Loss 250 VLD Mycom Screw
By Keith1977 in forum NH3Replies: 23Last Post: 20-09-2008, 12:28 PM