Results 1 to 7 of 7
Thread: Powering a 1/3HP Compressor
Threaded View
-
10-05-2003, 04:17 PM #1
Powering a 1/3HP Compressor
I have a 1/3HP compressor pulled out of an old '70s refrigerator. So far I've done some research and found that I may need a 12v power supply that will provide 30amps to the compressor while its starting? Or maybe that i could use 24v and 15a? I've been looking everywhere, but noone really has much on actually powering a vapor phase refrigeration unit.
The compressor says:
WR7X
138
1/3HP
3ARR20
A300
on the electrical connection on the side.
Thanks, any help is GREATLY appritiated!
Similar Threads
-
can overfilling/overcharging damage a compressor?
By fredjchavez in forum Trouble ShootingReplies: 10Last Post: 12-02-2009, 10:30 AM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM