Results 1 to 3 of 3
-
23-01-2008, 04:13 AM #1
City Multi with Aprilaire controls
We have a client with an automation system which has an HVAC interface with Aprilaire only.
We are told that we should be able to use Aprilaire's 8870 thermostats (networked) instead of Mitsu's.
The obvious downside is that it will be a dumb interface, and we won't get any of the other G50 advantages.
Alternatively, has anyone ever written any programming to control a G50 through an API?
Thanks,
Michael
-
15-09-2011, 01:42 AM #2
Re: City Multi with Aprilaire controls
Your first post is trying to poach a member to another forum, you sure have some brass neck to go with your covert (hyperlinks) sales pitch
Regards ChillermanIf the World did not Suck, We would all fall off !
-
16-09-2011, 10:55 AM #3
Re: City Multi with Aprilaire controls
Please check with ME usa whether will they disclose G-50/AG-150 XML protocol or not.
As far as I know there are only XML protocol for automation purposes beside BACnet and LonWorks.
Similar Threads
-
Mitsubishi City multi problems
By cooltech1 in forum Air ConditioningReplies: 9Last Post: 24-01-2010, 06:03 PM -
mitsubishi city multi fault code
By robin r33 gtr in forum Air ConditioningReplies: 5Last Post: 05-11-2007, 10:23 PM -
Need input on City Multi
By TDfromNY in forum Air ConditioningReplies: 4Last Post: 09-06-2006, 03:31 AM -
r22 city multi problem
By mr slim in forum Trouble ShootingReplies: 3Last Post: 11-01-2006, 06:27 PM -
city multi
By techni in forum Air ConditioningReplies: 1Last Post: 30-06-2002, 11:02 AM