Results 1 to 2 of 2
Thread: Defrost optimisation
-
16-01-2008, 12:47 PM #1
Defrost optimisation
I just came acorss this link.
www.irc.wisc.edu/file.php?id=173 -
Could be useful
-
16-01-2008, 06:20 PM #2
Re: Defrost optimisation
Optimization of hot gas defrosting is complicated issue. As you can see in this article we have more questions than answers. Just a few remarks.
1. I didn't get question about optimal hot gas temperature.
2. I don't see HEVs for hot gas.
3. Defrost energy required is focused on the coil only. No information about parasitic refrigeration load due to blow-by gas.
4. Very important question: When do you initiate a defrosting?
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
TK basic micro-p features and functions
By REEFER-TEK in forum TransportReplies: 0Last Post: 05-12-2007, 06:25 PM -
Hot gas defrost vs Electric defrost
By herdian in forum IndustrialReplies: 19Last Post: 13-08-2007, 11:25 PM -
Freezer Room Defrost
By Samarjit Sen in forum CommissioningReplies: 23Last Post: 21-06-2007, 06:16 AM -
Hot Gas vs. Electric Defrost
By herefishy in forum Technical DiscussionsReplies: 26Last Post: 08-03-2005, 07:50 PM