Results 1 to 6 of 6
Thread: Training in Scotland
-
07-01-2008, 03:42 PM #1
Training in Scotland
Hi to all at RE. I am self employed and have worked in the drinks industry for 20 years as a sevice engineer. Are there any training centres in Scotland that I could attend to gain the neccessary skills/certificates etc to re charge / repair, basic refrigeration units. Any info and advice would be most helpful.
-
07-01-2008, 07:03 PM #2
Re: Training in Scotland
Hi GSDS, Check out ellis training, You can find them in service engineer mag.They do a refrig handling course that should help you out,,.
-
07-01-2008, 07:49 PM #3
Re: Training in Scotland
Will check out Ellis....Thanks
-
07-01-2008, 09:13 PM #4
Re: Training in Scotland
Hi GSDS,
Be careful as you have correctly identified that you may have additional training needs to meet future and existing legislation. Just the refrigerant handling course will not provide that.
Regards......
-
07-01-2008, 09:20 PM #5
Re: Training in Scotland
Santa Fridge
You are so right again, come July the Refrigerant Handling will not be enough at all.
Ian
-
11-03-2008, 02:14 PM #6
Re: Training in Scotland
Try North Glasgow college run a 60 hr multi-skill night class with the possibility of achieveing refrigerant handling and brazing test.
Similar Threads
-
Lack Of Training Centres
By Latte in forum TrainingReplies: 12Last Post: 06-11-2008, 02:56 PM -
South East training required
By Dan03141 in forum TrainingReplies: 4Last Post: 21-11-2007, 05:48 PM -
Electrical training
By marc5180 in forum ElectricalReplies: 15Last Post: 08-10-2007, 08:04 AM -
Whats expected from training?
By taz24 in forum TrainingReplies: 13Last Post: 28-11-2006, 08:50 PM -
Training Problem.
By dogma in forum TrainingReplies: 17Last Post: 03-09-2006, 11:24 AM