Results 1 to 4 of 4
Thread: ICS Danfoss valve
Threaded View
-
28-12-2007, 05:52 PM #1
ICS Danfoss valve
Hallo,
I've mount an ICS 40 ( EVM pilot and pilot external connection on hot gas pipe) on suction line of ammonia pumped system. I want to use it for defrost cycle.
Maybe it is not the happiest solution ( I think PMLX would be better) but I've done it.
I've start up the plant and, after defrost the ICS can't open.
I think the reason are:
- dirty into the pipe
- the hot gas is not enaugh for opening the ICS
What are your opinion about it?
Similar Threads
-
FRICK TDSH 233 Slide Valve and guide damaged
By 404cab in forum Industrial CompressorsReplies: 9Last Post: 30-07-2008, 11:24 PM -
Danfoss PHTQ Valve
By dallan in forum IndustrialReplies: 5Last Post: 29-07-2006, 11:25 PM -
Need a correctly sized valve
By Abe in forum CommercialReplies: 2Last Post: 26-10-2005, 08:42 PM -
TEV with MOP: how to keep valve body temp above bulb temp?
By DaBit in forum FundamentalsReplies: 5Last Post: 16-10-2002, 12:38 AM -
Valve "Hunting"
By Abe in forum Trouble ShootingReplies: 20Last Post: 21-01-2002, 12:29 AM