Results 1 to 6 of 6
Thread: LG thermistor resitance tables
-
20-12-2007, 08:12 PM #1
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
LG thermistor resitance tables
Does anybody know where to find or have thermistor resistance tables for LG split system air conditioners.
I have Fujitsu thermistor data to exchange
-
20-12-2007, 09:36 PM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
-
11-01-2008, 12:27 PM #3
Re: LG thermistor resitance tables
I believe the sensor characteristics are the same for old and new models. See attached file for data.
-
11-01-2008, 05:14 PM #4
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
-
14-01-2008, 06:19 PM #5
Re: LG thermistor resitance tables
yep mac1 is right LG only use 3 sensors 1 for all pipes, i for air and 1 for compressor discharge.
all resistance charts etc are here www.mylg.co.uk go to fault codes and click on any of these manuals the fault codes are inside.
good luck Hendrag LG tech support
-
15-01-2008, 10:21 PM #6
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: LG thermistor resitance tables
Hasty me. I was on that site before and downloaded pdf-s with codes and did not carefully examined content of them. My bad!
Thanks hendrag, site is excellent !
Similar Threads
-
PH Chart and tables
By Bob45 in forum FundamentalsReplies: 33Last Post: 18-12-2010, 02:07 AM -
A/C Chiller Sizing tables
By romaurie in forum Tools and CalculatorsReplies: 1Last Post: 12-12-2010, 01:04 PM -
Looking for "K" factor and "U" factor tables
By mayot in forum FundamentalsReplies: 1Last Post: 03-02-2006, 09:19 PM