Results 1 to 10 of 10
Thread: TK multi-temp invertable basics
-
10-12-2007, 07:06 PM #1
TK multi-temp invertable basics
Both zones running in cool
Zone i in cool zone 2 in heat and serving as a condesor, for zone 1 contionouse cool mode.
Zone 1 in heat and evap coil serving as condesor for zone 2 running in cool mode.
-
10-12-2007, 08:25 PM #2
Re: TK multi-temp invertable basics
Nice graphics to see the system lay out and at work
-
11-12-2007, 06:46 PM #3
Re: TK multi-temp invertable basics
Yeah great post, keep it up.
The difference between genius and stupidity is that genius has its limits.
Marc
-
11-12-2007, 08:05 PM #4
Re: TK multi-temp invertable basics
thanks
regards A-Z
-
13-12-2007, 04:05 AM #5
Re: TK multi-temp invertable basics
Here's the same animated TK program.
Well I thought I could post you a link to that program, but says I don't have enough posts.
-
13-12-2007, 04:07 AM #6
Re: TK multi-temp invertable basics
Maybe this way....
www84.pair.com/waw/Mine/thermokinganimated.exe
Ya, that works. Cut-n-paste.
-
13-12-2007, 02:22 PM #7
-
13-12-2007, 03:29 PM #8
Re: TK multi-temp invertable basics
Nice work guys.
Good teamwork on this one ..... keep up the good work.
regards
T-PRemember what Augustus once said:
"festina lente" - make haste, slowly!
-
14-12-2007, 05:32 AM #9
-
14-12-2007, 07:17 AM #10
Re: TK multi-temp invertable basics
Similar Threads
-
MP66 & Compressor Overheating
By Intermez in forum Technical DiscussionsReplies: 111Last Post: 13-04-2010, 08:58 PM -
Multi temp installations
By nova in forum TransportReplies: 6Last Post: 13-09-2008, 09:38 PM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
cold room temp & the product temp
By smpsmp45 in forum NH3Replies: 9Last Post: 21-09-2007, 11:46 PM