Results 1 to 12 of 12
Thread: Cold Store Racking Design
Threaded View
-
05-12-2007, 12:07 PM #1
Cold Store Racking Design
Hi, am new to the forum and so, this is my first post. I am currently starting construction of a 950m2 cold store and I would appreciate any advice on racking layout standards. the M&E consultant has shown the evaporator units blowing across the top of racking at right angles to it and I was wondering is this the 'only' way to do this.
Looking at an elevation, the storeroom is 8375mm high, however we are loosing a level of pallet storage at the top due to the direction that the air is blowing. Can the fans blow down aisles? rather than across the pallet racking? and how high to the ceiling can you go and still maintain the required temp?
Thanks
Ashley
Similar Threads
-
Need Help with cold water tank design
By ac_sheldon in forum IndustrialReplies: 9Last Post: 21-11-2008, 11:24 PM -
Precautions in installing the cold store door from inside
By smpsmp45 in forum NH3Replies: 0Last Post: 26-10-2007, 11:10 AM -
Cold Store calc
By borley in forum Tools and CalculatorsReplies: 2Last Post: 19-10-2007, 08:23 PM -
Low Temperature Cold Store
By iceman007 in forum CommercialReplies: 12Last Post: 16-11-2005, 11:23 PM