Results 1 to 2 of 2
  1. 29-11-2007, 03:03 PM #1
    Tom9's Avatar
    Tom9 Guest

    "Annie" Analyzer MN A12 -120vac cord



    I have the analyzer unit but an incomplete manual for it. I need instuctions for connecting to 240 vac to try freeing a 4hp stuck heat pump compressor. My current guess is to change the 120 vac plug to a 240 vac plug. Is that correct? What's next?

    Tom E-mail removed by Mod
    Last edited by frank; 29-11-2007 at 03:26 PM.


  2. 30-11-2007, 12:36 AM #2
    Brian_UK's Avatar
    Brian_UK
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: "Annie" Analyzer MN A12 -120vac cord

    Hi Tom9 and welcome to the forum.

    There has been some discussions on the ANiies in the past.

    One thread -
    http://www.refrigeration-engineer.co...ighlight=annie
    Has a copy of the 240v model wiring diagram, maybe that will help you.

    Personally I wouldn't think changing the plug will be a good idea, 120v in doesn't make 230v out.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules