Compressor handbook / guide

[Grizzly]

I have a handy little booklet I have produced by printing off the down loadable pdf.
Was offered by the Thermacom Group but sadly no longer it seems?
Link listed below.
It contains useful data on how to carry out field insulation testing (Megga).
Compressor motor connections :- Star/Delta, Direct on-line, single phase, part wind etc. etc.
With lots of other useful stuff as well.
Enjoy!
Grizzly


Now available at mediafire as a download:-
http://www.mediafire.com/?tmwopnzcoxy

[Brian_UK]

Nice one Grizzly, thanks.

[Renato RR]

Wery clear and useful piece of paper.

Thank you,
Renato

[REEFER-TEK]

Thanks good info

[tao77]

Thanks, very detailed manual

[REEFER-TEK]

Great book thanks

[on4hf]

Thanks Grizzly for sharing this with us!

Eric.

[marc5180]

Great link, Grizzly.
Thanks

[Suta Eugen]

Its a useful book .

thank you

[EngrinQatar]

Thanks for sharing

[lgdcool]

Thanks for sharing!

[Giannis]

Very good ! Thank you

[Suta Eugen]

Thanks Grizly !

You have something about remanufacturing compressors procedure ? ,tolerance ,etc .

Thanks

[Springbok]

Nice one Grizly

[Kh1971]

nice thanks alot

khalid

[johnyfreon]

nice!! thank a bundle

[Kh1971]

thanks for your info, keep shining my star

[mustafa]

thank u dear

[Brad Chen]

thanks.good book.

[jack_vn]

that is a great book, thank you a lot !!!!!!!!!!!!!

[amfred]

thanks, i may not need it now but looks lots of information there

[Grizzly]

A big thanks to all who have replied!
We all try to help and it is nice when people acknowledge this.

Cheers Grizzly

[FreezerGeezer]

Grizzy, I'd love a copy but it seems your link is broken - the website it points to is down? Any chance you could e-mail me a pdf?

[Grizzly]

Grizzly, I'd love a copy but it seems your link is broken - the website it points to is down? Any chance you could e-mail me a pdf?

FreezerGeezer
Yep their website is throwing a wobbly!
It would be a pleasure to email you.
Sadly I can't download your v card to get your email address!
So pm with it and I will send.
Later when the tribe have finished with the computer.
I will look and see if I can post a new link?
Grizzly

[felixfab_93]

Hello Grizzly

can send your guide / hand to my email to?

Thanx

My email : felixfab83@gmail.com

[Grizzly]

Hello Grizzly

can send your guide / hand to my email to?

Thanx

My email : felixfab83@gmail.com

felix try the new link I have posted.
Grizzly

[TAARSEM]

thank you sir.

[porkey 1200]

hey thanks for that info . do u have any on vrf compressors .

[felixfab_93]

Thanx Grizzly it work

[boy]

Grizzly,

many thanks,a very important compressor
guide.

regards,

[james 100]

Very usefull, thanks.

[superswill]

top link, a great share

many thankx

[oilzee]

Hello Grizzly , thanks a lot i will keep it beside me.

[sachinm08]

Thanks. good data.

[nh3wizard]

Once again, Thanks Grizzly

[paddyaircon]

thanks- very useful

[mfakazi]

awsome stuff,really good....thanks again grizzly..oh Merry xmas

[glenn1340]

Thanks Grizzly.
I`ve been looking for this kind of info since my van was nicked last year along with all my tools, vibration monitoring equipment and years of accumalated manuals and hand written info on pressure settings, trip limits etc.
Once again, thanks very much for taking the time to put this up.
Happy Xmas and new year.
Regards Glenn

[Grizzly]

Thanks Grizzly.
I`ve been looking for this kind of info since my van was nicked last year along with all my tools, vibration monitoring equipment and years of accumalated manuals and hand written info on pressure settings, trip limits etc.
Once again, thanks very much for taking the time to put this up.
Happy Xmas and new year.
Regards Glenn

Thanks to everyone who bothered to say thanks.

It is not just me as there are lots of us that take time and trouble to post.
So let's all take the time to thank others when appropriate within the New Year.

Glen PM me and I can let you have more stuff of a similar style!
I have been there and it Hurts like Hell!
Doesn't it!

I don't know about anyone else, but I certainly am looking forward to the break over the "Holidays".
Cheers Steve.

[mcunliffe4]

cheers bab well good

[botrous]

Thanks Grizzly

[Peter_1]

Just noticed this link now Grizzly and busy with downloading now.
Thanks mate.

[Plank!]

Well its Christmas so i'll say thanks too.
Its a very useful file to give to the apprentices at work.

Cheers Steve.
Steve

[Reeferman27]

Thanks for the info.Hope you had a good one?

[glenn1340]

Thanks for offering to send me more info Grizzly but I should have mentioned most of my work is on large industrial air compressors so your info would probably not be in my field (let alone go way over my head!!) but I do often work on refrigerated compressed air dryers. I have, by the way, been removing redundant split units and re-installing them in another part of a plant (pidgeons...don`t you just love the mess they make) which I found very interesting and, at times, frustrating which is how I found this very useful forum.
Once again, thanks very much for the kind offer.
Regards,
Glenn

[Grizzly]

Thanks for offering to send me more info Grizzly but I should have mentioned most of my work is on large industrial air compressors so your info would probably not be in my field (let alone go way over my head!!) but I do often work on refrigerated compressed air dryers. I have, by the way, been removing redundant split units and re-installing them in another part of a plant (pidgeons...don`t you just love the mess they make) which I found very interesting and, at times, frustrating which is how I found this very useful forum.
Once again, thanks very much for the kind offer.
Regards,
Glenn

No problem Glenn,
We all like to help when possible that,s the beauty of the forum!
Most of us have been there ourselves and still are at times.
You are not alone with the amazement of the breadth of knowledge available on the forum.
Sometimes it scares me to answer something for fear of looking stupid amongst my Peers!


And for all that have replied I THANK YOU.
Grizzly

[icecube51]

thanks Grizzly, put it in use already. made a copy for the Van. never now when needed again.

Ice

[Peter_1]

I'm glad an old thread helped others again.

[michaelm]

B”H

Hello Grizzly,
Thanks a lot. Sweet, healthy, happy and successful years to you and yours.

[Suta Eugen]

Thank You Grizzly and a happy new year !