Results 1 to 3 of 3
Thread: Expansion Valve Sizing
-
25-11-2007, 09:08 PM #1
Expansion Valve Sizing
Good day everyone ! ! !
first time to post a thread,a simple one.
how could we size correct expansion valve to a unit ,if we have no info or idea about its original specification itself.
thanks..
-
26-11-2007, 01:33 AM #2
Re: Expansion Valve Sizing
Check the details of the compressor and take an educated guess.
Choose an expansion valve with interchangeable cores ORIFICE ORIFICE ORIFICE, that way it's less of a trauma if you get it wrong.
Good luck
Sorry, just reread my message and realised my mistake, hopefully you understood what I meant.Last edited by The Viking; 27-11-2007 at 12:22 AM.
-
26-11-2007, 11:39 PM #3
Re: Expansion Valve Sizing
Hi, Cristopher_uy
Maybe you can use some of software for better picture...and of course...very good advice
Originally Posted by The Viking
http://www.danfoss.com/BusinessAreas...ning/Software/
Enjoy..
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
Similar Threads
-
Expansion Valve Selection
By raviperumal in forum Technical SpeculationsReplies: 12Last Post: 17-02-2010, 10:58 AM -
Fitting an expansion valve question
By Larry2 in forum Air ConditioningReplies: 20Last Post: 08-04-2008, 04:17 PM -
expansion valve aint cold
By justinworne in forum Trouble ShootingReplies: 6Last Post: 26-07-2006, 10:52 PM -
I want to find detailed files about ALCO zz thermo expansion valve
By brightfu1 in forum FundamentalsReplies: 2Last Post: 07-09-2005, 03:07 PM -
pressure drop between expansion valve and distributor
By aygul in forum Technical SpeculationsReplies: 10Last Post: 22-01-2004, 10:47 AM