Found by accident

[Fixaman]

Hello Everyone, Just a quick note as i am new to the site, found it by accident looking for ac info on the net, I work out of Northampton for Airedale Service i know they're not everones favourite but it pays the bills, some very usefull experiences / info found on here, keep up the good work fellas, speak to you soon, cheers

[Brian_UK]

Hi Fixaman and welcome to the forum.

Don't worry we won't hold it against you about Airedale; someone will probably want to scrounge some manuals soon

[chillin out]

I quite like them!

Welcome to the forum.

I work with quite a few of them so if you have any sneaky manuals, I would gladly take them.

Chillin

[superswill]

welcome fixaman

again i work with alot of airdale close control so iam sure your help will be needed,

Just had a great experience with a alpha close control system, got a call the other thur asking me to work the weekend to fit a compressor on said system, a very good customer of ours has two systems in there comm’s room one stand by and one sized to do the required duty, the other was playing up so it was a rush job, another “engineer” had spent two days there and ordered a new pot as the other was down to earth (two stage systems, four comps two indoors) I get there sat morning and by touch light just check before a start reclaiming and yep you guessed it was fine, well the expansion valve was up the duff causing the comp to trip on its internal safety, I was home by dinner and fitted the new valve three days later, now that’s what gives manufactures a bad name, the service sheets left for clients not the kit.

Moan over

[p_p]

Hi Fixaman



Welcome to RE



PP

[Fixaman]

All manuals can be downloaded from Airedale website

[Josip]

Hi, Fixaman

Welcome to RE forums....hope you'll enjoy here..

Best regards, Josip

[marc5180]

HI and welcome to the forum

[paulc1978]

hi phil is this you fixaman? its paul on service dept

[Pooones]

So Airedale do read this forum then!

I find them rather good and always get to the bottom of the problem in the end...