Results 1 to 32 of 32
Thread: Adding *****
Threaded View
-
04-02-2003, 09:45 PM #1
Adding *****
I have a 17 year old GE top freezer refrigerator (Model TH23X I think). The freezer section will not go below about -2 degrees C even with maximum setting. I cleaned all the dirt from the condenser fan and the coils. I know the fan works and the compressor works (almost 24 hours a day) and the internal fan works.
I think it just needs a shot of *****, but there might be a small leak somewhere and the repair people I called will not do it unless they check for leaks first. I figure if it leaks it's not worth fixing but I want try a shot to see if that works.
The compressor has a threaded fill valve but I don't have the proper fittings. I would like to know where I might get the proper fitting and the type of ***** to add. It only holds about 5 ounces according to the spec sheet.
If I can make the fridge cool properly I will keep it, otherwise I guess it gets dumped. That would be a shame becaue the interior and exterior look like new.
Thanks for any information!!
Similar Threads
-
Water in *****
By chemi-cool in forum RefrigerantsReplies: 47Last Post: 17-08-2009, 10:16 PM -
How much *****
By mikepa in forum RefrigerantsReplies: 11Last Post: 11-11-2008, 07:19 PM -
***** 404 A
By Levin in forum Technical DiscussionsReplies: 0Last Post: 18-08-2003, 08:45 PM -
***** System Pressure Relief
By trong40 in forum FundamentalsReplies: 7Last Post: 31-07-2003, 12:26 PM -
Noobie question.Evaporator Pressure.
By kfjoe in forum FundamentalsReplies: 8Last Post: 04-03-2003, 09:11 PM