Results 1 to 6 of 6
Thread: Low Temperature Brazing Rod
-
23-10-2007, 03:47 PM #1
Low Temperature Brazing Rod
Years ago a friend of my from England brought me a brazing rod that i was able to use with a cigerate lighter to join to pieces of refrigerant copper pipes.This friend on mine is no more in Nigeria, I have been trying to reach but all in vein. Please if someone knows this type of brazing rod let me have the detail of it so that I can place an order.
Best regarsd,
AHAMED KYANA
-
23-10-2007, 11:32 PM #2
Re: Low Temperature Brazing Rod
That was a long time ago.. are you sure it was for copper as I remember one that did the cheep ally that you find in Domestic evaps... but that was about 1975
-
24-10-2007, 03:15 PM #3
-
26-10-2007, 10:42 PM #4
Re: Low Temperature Brazing Rod
are you sure it was rod and not a high silver content solder to be used with an acid flux.It's strong but goes pourous after many years have passed.
-
27-10-2007, 10:26 PM #5
Re: Low Temperature Brazing Rod
Real high silver content and becoming porous??
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
28-10-2007, 04:35 AM #6
Re: Low Temperature Brazing Rod
It had been 4 years from now
Similar Threads
-
fun quiz
By Brian23 in forum New to REReplies: 6Last Post: 02-10-2007, 10:18 PM -
bubble temperature?
By marc5180 in forum FundamentalsReplies: 5Last Post: 21-08-2007, 02:05 PM -
re ref. circuit
By shsalameh in forum FundamentalsReplies: 5Last Post: 06-08-2007, 12:59 PM -
Q=? h1=? mechanical schematics
By fridg in forum Technical SpeculationsReplies: 22Last Post: 19-03-2006, 01:43 PM -
Article in ACH&R News
By Gary in forum FundamentalsReplies: 8Last Post: 20-05-2003, 12:27 AM