GRAM GSB 465 - documentation

Hi everyone,

does anyone have exploded view of all parts with positions of each part for ammonia screw compressor GRAM GSB 465, MFY: 1999?

Also any other documentation, like manual, would be very helpful.

This compressor is very rare, so I can't find any documentation for it.

Quote:

---

Originally Posted by matijaZGB

Hi everyone,

does anyone have exploded view of all parts with positions of each part for ammonia screw compressor GRAM GSB 465, MFY: 1999?

Also any other documentation, like manual, would be very helpful.

This compressor is very rare, so I can't find any documentation for it.

---

Matija,
Check your email as sent a few pictures, let me know what you think.

Hi Matija.

Following Rangers lead, I also have sent you a manual.
Which should help?
Grizzly

Hi guys,

I only got manual from Ranger on e-mail and thank you for it.
I know that SAB 283 is almost the same as GSB 465.
This will help me alot, but exploded view even more, because problem is there are a
lot of O-rings and other parts that we must search where they go if we don't have
exploded view of all parts.
I received manual from JCI, but also without exploded view.

We will do it without it, but it will take longer. :)

Thanks again for help guys.

Cheers from Croatia.

Hi Matija.

I have just checked and the system administrator has rejected my email to your Gmail account.
I suspect the size is to big?
Sorry Grizzly

Sab 283 Manual sent.
Hope you get it?
Grizzly

With large files, it is better to upload them to something like Google Docs and then send/post a link

I got it Grizzly, thank you very much!

Hi friends,
compressor GRAM GSB (GRAM I) also cheap FRICK for Europe and production as well as FRICK TDSL (GDSL) parts and compressor layout is identical to TDSL, perhaps only out for the shaft seal can FRICK but GRAM.
GSB uses another clearance, and some strangeness, but it needs at least the image compressor.
Cheers Josef.

Quote:

---

Originally Posted by matijaZGB

Hi guys,

I only got manual from Ranger on e-mail and thank you for it.
I know that SAB 283 is almost the same as GSB 465.
This will help me alot, but exploded view even more, because problem is there are a
lot of O-rings and other parts that we must search where they go if we don't have
exploded view of all parts.
I received manual from JCI, but also without exploded view.

We will do it without it, but it will take longer. :)

Thanks again for help guys.

Cheers from Croatia.

---

Matija,
In spare parts list I sent is exploded view, which is about the best views you can get for this machine.
It shows unload pots, list of all "0" rings which is in kit.
Check it out again, as I sent 2 emails, on first look at Frick 233 & scroll through to 283.
Also at beginning is kits & in parts list it shows what's in kit & where it goes.

I need in spare part list and exploded view GST-41 too. May be you can help me?

Check your email, not sure what it is compared to Frick