I URGENTLY NEED A SITE WHERE A DUCTULATOR OR JUST ANY SOFTWARE TO CALCULATE DUCTINGH SYSTEM-
Regards
Printable View
I URGENTLY NEED A SITE WHERE A DUCTULATOR OR JUST ANY SOFTWARE TO CALCULATE DUCTINGH SYSTEM-
Regards
hi dear
try these sites
www.ductmate.com
http://coolit.co.za
www.psychrometric.com
www.warmair.com
www.energy.ca.gov
www.toolbase.org
www.airah.org.au
www.smacna.org
www.connel.net
good luck
faithfully
afeef
HI pravin check this Small Softwere,,
Regards
I Have a 5 ton trane heat pump with a 42 foot run of duct. The duct starts as a 24x10 for 6 feet, then reduces to 20x8 for 12 feet then 16x8 for 18 feet and then 12x8 for 6 feet. The rooms in the house are all fed from this main duct line and are 5" round ducts. Any thoughts?
First thought, perhaps you should start your own thread. :)
send me your email, i will post it there
it did not run on my pc please teach me how. this my e-mail add: ginx1985@yahoo.com
thanks
Just download the zip file that MANIS posted, unzip, and run the program, if you cannot run the program because of vbrun300.dll error, it is because you don't have that file in your windows installation. In order to fix it, you must download vbrun300.dll file from the site dll-files.com and unzip the file on the c:\WINDOWS\System and now you can run the program!! :)
@MANIS Thanks for the program! :)
Hi Manis
file wouldnt run on mi PC, could you send it at alvarosyp@yahoo.com
Thank you
Thanks for the freebie