In the screen control there is WARNING -WRONG SERIAL NUMBER.
please help.
Printable View
In the screen control there is WARNING -WRONG SERIAL NUMBER.
please help.
Hi Soulreaver18.
Welcome to the forum.
I have managed to find this advise!
Invalid Serial Number Warning
If the INVALID SERIAL NUMBER message appears,
immediately contact YORK Product Technical Support.
The appearance of this message may mean the chiller
has lost important factory programmed information. The
serial number can be entered using the Service Key.
Additionally, when this appears, an Optimized IPLV
chiller will only run in Standard IPLV control mode.
Optimized IPLV cannot be enabled unless the serial
number is programmed into the unit using the special
password supplied by YORK Product Technical Support.
Once the password is entered, a second password will be
needed to activate the optimized IPLV control.
This status message can be bypassed to view addi-
tional messages under the STATUS key by pressing
the STATUS key repeatedly to scroll through as many
as three STATUS messages that could possibly be
displayed at any time.
It would appear that your software has become corrupted!
Did you have a Power Cut / Spike or Something?
You need to contact JCI / York, I am afraid.
There are no quick fixes for this one!
Good Luck Grizzly.