Chiller YORK YCIV0840 Baseplate

Hello all
chiller York YSIV0840
Faulty pump glycol
The display shows: SUS1 LOCKOUT : HIGH VSD BASEPLATE TEMP.
Please, provide technical support and help
Sincerely, Anatoly

amendment YCIV0840SA50VAB

Hi Anatoly
Is your glycol pump ok? Check glycol level.
Check the cabinet fan or you may have a faulty sensor

Hi hookster
The pump is faulty.
It was the starting block with a broken pump.
Tell me where the sensor?
What are the terminals connected?
Do I need to manually reset this accident?

Quote:

---

Originally Posted by *****959

Hi hookster
The pump is faulty.
It was the starting block with a broken pump.
Tell me where the sensor?
What are the terminals connected?
Do I need to manually reset this accident?

---

you said already the glycol pump is faulty.i dnt know what type of pump fault. repair or replace it.

The pump is already engaged may replace a new one
problem
Display Indication Sus1 BLOCK: HIGH TEMPERATURE IRR baseplate.
Removing the accident and where the temperature sensor

amendment SUS1 LOCKOUT : HIGH VSD BASEPLATE TEMP.

"Removing the accident"cannot understand. what is the glycol level? if glycol level is low, base plate temp will go high.

circuit status off
where the temperature sensor is installed

Leave sensor location it is on PCB you can not do anything...... If u replaced Glycol pump just topup glycol.......untill overflow then close cap.