MyPro with BAS

Hi everyone!

I am just curious, how you connect MyPro CP1A to the BAS MicroNet MNL 800-101 with a LON connection?

Thanks!

Howdy,

Page 99
Then page 103 onward
https://www.mayekawausa.com/pdf/tech...P1A_manual.pdf

Happy tinkering!

Quote:

---

Originally Posted by HVACRsaurus

Howdy,

Page 99
Then page 103 onward
https://www.mayekawausa.com/pdf/tech...P1A_manual.pdf

Happy tinkering!

---

Oh, thanks!
Does it mean, the communication board should be installed and wired with BSA by gateway (to convert Modbus to LON)?

Thanks!

.

Are you guys speaking English?

Or a version of Swahili and Martian??

:D

Rob

.

Quote:

---

Originally Posted by xixxi

Oh, thanks!
Does it mean, the communication board should be installed and wired with BSA by gateway (to convert Modbus to LON)?

Thanks!

---

Hey,

The Mypro talks with RS-485

Mostly at your computer you will want 232 or Ethernet or USB

Just Google “rs-485 converter”

There are many choices & not all are expensive

Enjoy

Ps, whilst you could probably use Lon, again it’s just another conversion - there are likely several ways to pull the data

Something like this;

Attachment 15300