Re: 410a refrigerant burns
Quote:
Originally Posted by
rbartlett
guy's
has anyone else noticed that 410a seems to burn far more than any other refrigerant?
almost every time i remove my gauge lead i end up with a burnt finger(s). I know I'm not doing anything different to 22 or 407c etc so it must be the gas...
cheers
richard
I've not had the pleasure of being burnt by it yet;)
This may be too simple but do you think it could be because it is so cold compared to R22 at ambient. Its about 20degc lower.
Cheers taz.
Re: 410a refrigerant burns
or maybe that it is a million psi higher than r22 so you have a million psi more in your guage line!or maybe you didnt follow the instruction that b&q gave you when you bought the unit.sorry i`m having a bad day.:)
Re: 410a refrigerant burns
I trust that you are using protective gloves and shut off valves on your gauge lines there Richard :)
Re: 410a refrigerant burns
Quote:
Originally Posted by
Brian_UK
I trust that you are using protective gloves and shut off valves on your gauge lines there Richard :)
Valves on 410 gages are good and we all know we should always wear gloves;)
taz.
Re: 410a refrigerant burns
Yeah, I had a nasty nip from R410 this Summer. Because of the higher pressure it is more difficult to unscrew my connectors and allows more refrigerant to escape, in this case getting cold enough to freeze the skin even in my gloves, because my gloved are quite short, liquid refrigerant managed to get around my watch strap and make a real mess of my wrist. I have bought a couple of quick connectors for R410 from RPW but they will only connect to 1/4 inch flair hoses :mad:
Re: 410a refrigerant burns
i too had a taster,had to remove someone elses gauges without shut off valves, wakes you up a bit.
Re: 410a refrigerant burns
Get the quick coupler set from SRW, I've had them for 2 years now, never had a cold burn since:cool: