Sabroe offer new SMC100 compressors at 1760rpm, has anyone experience with machines running at that speed good, or bad?
Printable View
Sabroe offer new SMC100 compressors at 1760rpm, has anyone experience with machines running at that speed good, or bad?
Hi Ranger.
As of yet I don't look after any, nor have I heard anything about them.
Time will tell.
Grizzly
Thanks, they have a new range of long life parts.
Just not used to such high speeds & that usually means will not last as long.
Mycom K at 1440 on ammonia seem to be able to do 20,000 hrs no problem, but light components like aluminium conrods.
RANGER1,
for a while on the market, but it seems OK Mk5.
I will probably be cautious with the long life of the parts until I believe it.
Josef.
Sabroe brochure on long life parts.
http://www.sabroe.com/fileadmin/user_upload/Marketing/Brochures/Parts_and_AfterMarket_Solutions/3795_JCI_Long_Life_spare_parts3Year_ENG_Prt.pdf
The lasts MK4 already could run at 1800 rpm as maximum and also with "LL" Long Life parts with wider maintenance intervals.Quote:
Originally Posted by josef
Hi, RANGER1:)
as Grizzly said "time will tell" ...Quote:
Originally Posted by RANGER1
I believe machines are OK, but we know on site is a "real" work ... then a lot of things depend on operators, bosses and many other people or things ... and probably some (even LL) parts are much weaker then other .... again "time will tell" ...
If machines will run in shorter maintenance intervals ....
simply, you'll have more jobs with maintenance ;)...
Best regards, Josip :)
Last year I made start up on 8 SMC 108 L with VSD and Sabroe sad its 1500 rpm max.
best regards
Aki
Maybe because of motor size it is limited to 1500 rpm.Quote:
Originally Posted by AKI
The "E" compressor can only go to 1500 rpm.
http://www.sabroe.com/fileadmin/user...AE_01.2018.pdf
http://www.sabroe.com/fileadmin/user...2_GB120dpi.pdf
I agree absolutely with Josip and just want to tell you be careful with this.Sabroe have many broken new compressors.Of course they hide that.