Frick RWB II Coalescing filter

How much oil will be needed when replacing Coalescing filter on a RWB II 60.
Thanks

http://www.johnsoncontrols.com/-/med...ick_rwf_ii.pdf

Page 7 & 27 may be of use.
See torque setting on coalescer filter but on 27

WYLBEK,
From what I can gather 25 gallons oil separator & 3.5 oil cooler.

Thanks Ranger1, I looked up in manual that it holds 35 gallons in machine, but wasn't sure on how much would be in system elsewhere. 25gallons sounds good to me.

Hey,

Don't forget - the Coalescor is on the weir (dry) side of the separator baffle..

Replacement of the Coalescor should not be impacted by oil in the separator.

Happy tinkering

Quote:

---

Originally Posted by HVACRsaurus

Hey,

Don't forget - the Coalescor is on the weir (dry) side of the separator baffle..

Replacement of the Coalescor should not be impacted by oil in the separator.

Happy tinkering

---

Normally we would just change coalescer, Frick recommend change oil as well, because it is a fine filter I guess they want the best for new filters.