help with design plate echanger?

Is here somebody who can help me with design plate exchanger, only Alfa Laval, I can get this echanger very cheap, refrigerant R410a?
Its for inverter heat pump.

Have you tried the Alfa Laval website ?

i'll need more detials on your application.
A/L has specialised people working on each application.

more details would helps us to help you. cheers.

website of course,
EXCHANGERS ARE ACH30
Its application with Fujitsu inverter AOY36, so it 10,5KW(100% load)
5,25 kW(50% load)
Im afraid of laminary flow.
Design condensing temperature +37°C or lower, water 35/30°C or + - for the best solution.
It could be ACH30-and 42desks?
Very thanks.

Quote:

---

Originally Posted by jirhol

website of course,
EXCHANGERS ARE ACH30
Its application with Fujitsu inverter AOY36, so it 10,5KW(100% load)
5,25 kW(50% load)
Im afraid of laminary flow.
Design condensing temperature +37°C or lower, water 35/30°C or + - for the best solution.
It could be ACH30-and 42desks?
Very thanks.

---

sorry, friend.
just return to my desk after long holidays.

piles of responsibility to perform ...

will look into your issue/s in a short while. cheers