Printable View
Hello,
do you know the part number insert of the solenoid valve in the regulation performance of Grasso piston compressors Series 12, 10 and V? Is it Danfoss EVRB 3? EVRB 3 can not seem to find. Gea sells only complete block. Unfortunately I do not have photo.
Thank you very much.
Hi Podik , if I'm well known, variants Danfoss but GEA, I need a picture, not otherwise identify. Keep in mind that there are even orifice.
Josef.
Hi Podik.
The solenoid coils and valves are not made by Danfoss and are not readily available from anywhere other than Grasso.
I want to call them Lucifer valves!
I did have annex colleague who sorced some solenoid valves from a hydraulic supplier but I don't have the details.
Good luck Grizzly
Yes, the old type is Lucifer, but the new type is Danfoss. Tomorrow I'll send a detail photo
https://c1.staticflickr.com/9/8193/8...193591ea_b.jpg
Not sure, but if you had a Danfoss EVM pilot solenoid or repair kit,it would have to be close & worth a try.
On screw compressor they have "0" ring instead of aluminium sealing ring, these I am not sure.
Coils cost a small fortune with no alternative that I am aware of.
Here is photo. It is EVRB? Thank you
http://www.imagehosting.cz/thumbs/valve.jpg
Hi Podik,
not EVRB, is EVRF
Josef.
Thanks.
BTW: Ty jsi Cech? Pan Planavsky? Tak to jsem Vam moh zavolat. :-)
Hi Podik,
Grasso code for internal mecanism are:
NO 06 80 343
NC 06 80 342
some more,
06 80 342 is for ...V AC
06 80 341 is for 24V DC
NO is the same for both
Super, thank you very much.