Printable View
we are urgently need the following components for a R744(CO2) transcritical refrigeration system
pressure should be 120Bar
1.evaporator (air cooler)12Kw
2.condenser 22Kw
3.liquid receiver(liquid tank)
4.oil seperator
5.solenoid valve
6.electrical expansion valve
7.check valve
8.sight glass
9.dryer filter
10. pressure controller
11, pressure hose
12.check neddle valve
13. high pressure control valve
14. safety valve
If you can supply the above components, please contact me ASAP.
.
Most wholesalers in the UK will either stock that
equipment or be able to source it, have you asked any
of the large wholesalers?
Regards
Rob
.
Rob, hard to find components for more than 60 bar. Where can you find a dryer, sightglass for these pressures?
It's quite common in the UK because the supermarkets are using C02.Quote:
Originally Posted by Peter_1
You will find that common fittings (sight glasses excluded) are rated well
above what C02 runs at and all it takes is a re-issue of an insurance test
certificate.
It is surprising just how high fittings are tested to prove them safe,
it is a lot higher than the X 1.43 that it states in the EN378 standards.
Regards
Rob
.
I think you tell us about 2 stage system *****\heat-transfer agent\Cooler CO2