all reefer container problems/daikin/carrier/thermoking/mitsubishi

hello sr, I HAVE A PROBLEM WITH MY REFEER , HAS THIS MESSAGE. ENGINE STALLED. IDONT NOT WATH IS THAT CAN YOU HELP ME IM SORRY FOR MY BAD WRITER:confused: THANX SO MUCH:D

I forgot my unit its a carrier ultima53 year 2000

Quote:

---

Originally Posted by pacoperez60

I forgot my unit its a carrier ultima53 year 2000

---

hi pacoperez,

first nice too meet you.I think your unit is truck or trail unit.I repairing reefer container units.I cant help you..Sorry...

see you

reefer mechanic..

Quote:

---

Originally Posted by reefermechanic

Hi Opieman.

İ think i found service manual of your machine.You need which one??

RD-II and RD-II MAX (TK40181-1-MM).pdf

RD-II Max (TK41023-1-MM Rev 1 10-27-03).pdf

RD-II SR (TK41131-1-MM Rev 04-03).pdf

RD-II TCI & RD-TLE (TK50394-1-MM Rev. 2-99).PDF



Also you give to me your mail adress.İ will send to you:))))

See you,

Reefermechanic

---

hi...can you give me some link...heres my my email add.....agonish_04@yahoo.com

Dear Reefer Mechanic,

Would you like to sent me Service Manual / Operating Manual of Reefer Container "DAIKIN" LXE 10 D ?

My Email Address is tri_ardi@yahoo.com

Best Regards,
Triardi S.

Dear bro...
When i was doing pti (thermoking unit,magnum), alarm 115 and 116 were come out.it does mean sensors faulty but when i check connection and ohm,showing that all in good condition (2000 ohm) please help me how should do?

.....................

HAY ALL,
i am technician in the reefer , pls i have probleme with t.KING ( quest allowed) i want to clear it but i need help .

BESTB REGARD

Sorry for late reply,mate ! I haven't try to change yet coz i haven't spare part yet but i'll be change return air sensor and reply you no sooner.
Thank you so much for your reply.

Thanks a ton. It's really worked!
When i was changed return air sensor , the unit is ok and pti pass.....i am quite curious coz the measure the value of ohm is nothing different with the old and new one sensor..? ?

Hi, banana
Try icebath calibration

Quote:

---

Originally Posted by ppsmtu

hi
good day
i want to know aboutthermo king reefer unit on message (quest not allowed by timer). can u explain me and how to clear this message ?
thanks you
pyae

---

Hi, you shouldn't need to clear this. Quest is a power saving initiative. Starcool and ThermoKing also use it, Daikin call it DTMS2.
It is exactly as you state "a message". It is telling you that the power saving mode (Quest) is currently not active due to a controller initiated time delay.
As per Reefermechanic's menu picture, it is in the MISC sub menu Under STATUS.
Quest should be left to do what it is supposed to, and only turned off if you have a very good reason :-)

"QUEST power-saving mode is a software-based control option for Carrier Transicold refrigeration units that intelligently cycles refrigeration on and off based on temperature limits designed for specific perishables. It can cut energy requirements for refrigeration by up to 50% while also reducing power-related emissions."

pak teguh...
punya softwere untuk daikin, \tk, mitshubisi.
kalo ada boleh untuk di share ke saya
terima kasih

Please i need manuel for trailer theroking

Please i need manuel for trailer theroking ANYONE CAN HELP ME SEND IT TO ZAHERADIDAS@HOTMAIL.COM

Quote:

---

Originally Posted by terminal

plz i have probleme with dakin for f 803 END F109; I WANT TO KNOW THE GOOD SOLUTION FOR THIS PROBLEME;THINKS MY TETCHER

---

hi the problem is ev .u must adjust ev or change it . tnks:reefer sup

note that it's no alarm ,i thinc sae tect reefer play in cofiguration i check and i bac whit good ansower. tnks/reefer sup

Quote:

---

Originally Posted by terminal

HAY ALL,
i am technician in the reefer , pls i have probleme with t.KING ( quest allowed) i want to clear it but i need help .

BESTB REGARD

---

note that it's no alarm ,i thinc sae tect reefer play in cofiguration i check and i bac whit good ansower. tnks/reefer sup

Hi reefermechanic ,can you advice me on truck unit - T/K Spectrum MT ?

PM me .tq.

I have an old carrier 511-331. Its not modulating at all and also seems to be turning on only when the return comes 1 degree over set point and will go down 4 or so degrees under setpoint. Now I havent spent much time on it but have tested power coming to the plug connected to the stepper motor..I have voltage coming through on all 4 lines.. Should only have power on A/B or C/D at one time as A/B open and C/D close it if my memory serves me correctly. So that tells me the stepper motor itself is not the issue, however does this mean somehow it is the microlink or could it be the power module or even something else? just trying to get another opinion as it is a leased box and I cant just start changing random parts. P.S I did check to see if quest software was on this box and it is not.

dear all;
first happy now year;i have reefer daikin with AL :d301;but i dont new the solution,plz help me urgently

hey 1612

check for broken wires behind the compressor and suction valve. they rub on the back wall sometimes. also the drive module or if its an APL the emergency module fails. if it has an emergency module remove it and plug into the SMV directly

good day evey body ;).
i look for some advice from the refrigeration-engineer experiance.
me issus is i can found the stare cool reefer unit softwear to import the data logger from this unit.:off topic:.
please advice .
badilou.nabil@yahoo.com
:eek:

Hi

I need 2 manuals for these equipments:

ThermoKing MDII-MAX
Carrier Mistral 800

please send it to nunovgato at gmail.com

Thanks

alguien en español por favor nesesito datos diagramas de carrier intercambio informacion tengo todo de thermo king grasias ggeras@hotmail.com

Hi Climo-tecnica,
Could you speak in English?

Hi Ci 1612,
I think you should check CD18 CD20 and CD34 to verify the setting of configuration, software versions and Economy mode.

Hi Starezone,

Please receive email for software.

Hi, reefermechanic

Im Dante, can I charge a Carrier reefer with 404a its present refrigerant is 134a?....Pls. give me more info about this. Thanks:)

Dante

Hi Dante,

I think you can not charge it with R404a. Because the working pressure of R404A is too high to fit this pipe system. and the components, for example compressor, TXV, HPS.... are not suit R404A.

transcold.

Thank you for your comments, Transcold...One problem I have is I can't find a compressor to my reefer with model no. 06DR241BCC06C0

Quote:

---

Originally Posted by starezone

Good day.
i'm a biginner technician in reefer side.i want to bay some data retreive connector .but i have problem to found them ...
can some body assist.
badilou.nabil@hotmail.com

---

dear badilou
why you not ask me to help you.i was naer to you

Hi reefermechanic, I have Thermoking C11/M40 been off for four days. On switch on unit shows fault code 10 high refrigerant press/temp, ambient here at present 3 degrees C unit also faults 38 lithium batt. any ideas?

...................

hi all,

i attached 2010 Marine Solutions Americas Training Brochure to the here..

Also carrirer training program;

https://www2.carrier.transicold.com/...adedb?OpenView


have a nice day.

reefer mechanic.

hi all,

for daikin......

contact adresses..

Europe Office
daikineu@xs4all.nl

North America Office
reefteck12@cs.com



South East Asia Office
goh.choonleng@grp.daikin.co.jp

South America Office
alvaro.quintana@adinet.com.uy
robert.ferreyra@adinet.com.uy

Quote:

---

Originally Posted by reefermechanic

Hi All,

I m senior reefer technician.İf you have got any problem about reefer container units . i will be here....

All the best.

---

Hi Reefermechanic, as stated a reefer in Uk is for refrig container shipment. No engine. I have a CF11/M40 on a customers sight it has been off a week and ambient here at moment 3 degrees C standing press 6.75 bar R134a when switched on alarm code 10, & 38 will be displayed motor does not energise at all have tried dissconecting dischrge sensors still will not run. any advice would be apreciated:confused:

Does anyone have the User manual for Thermo King SmartSponge Software.pdf ?

can you forward to mfz@primetronics,biz
many thanks

Hi does anyone has latest Daikin Reefer software. I am having V6.04. Appreciate if someone could mail to me at ekbal@shmaritime.com
Thank You.