Liquid Receiver Calculations
I am trying to clarify the best method to calculate the capacity of a liquid receiver.
At the moment I presume that I calculate my liquid piping internal dimensions, suction piping internals dimensions and evaporator/condenser dimentions.
If I use the selected refrigerants specific density for liquid and gas and multiply by the total m3 this should give me the total refrigerant charge?
Thanks
Re: Liquid Receiver Calculations
I always use next solution - 1/3 evaporator`s internal volume + internal volume of condenser + internal volume of liquid line + 20% for gas volume. But this solution suitable only for direct expansion systems.
SNi
Re: Liquid Receiver Calculations
I always use next solution - 1/3 evaporator`s internal volume + internal volume of condenser + internal volume of liquid line + 20% for gas volume. But this solution suitable only for direct expansion systems.
SNi