Does anybody happen to know the 3 charactor PIN code for the service level access on Liebert Hiross close control downflow units.
I just need to reset the interval counters.
Thanks
Whisty
Printable View
Does anybody happen to know the 3 charactor PIN code for the service level access on Liebert Hiross close control downflow units.
I just need to reset the interval counters.
Thanks
Whisty
try 221 - i think this is the code??
cheers aeb
That will work.
Just be careful, with that code you are able to do a lot of damage.....
Thanks for the info but unfortunately the reason that I'm posting is because 221 doesn't work :mad:
what about 805
You need a hiromatic controller connected to unit to reset the run hours
try with 149 & 501
malik55
Hi I also remember the code to be 501
Sorry, you are wrong. The lcd is a display that clips onto the Microface controller in most cases & the Hiromatic is a display that plugs into the Hirobus socket on the Microface, giving you a more user friendly interface into what the Microface is doing/set to.
The Hiromatic also allows you to view & change settings of any units networked through the Hirobus connections.
Dear all
Pls help...how to reset the controller hiross.i having alarm signal at red led,and the display show the triangle alarm but not show any massage.how to reset that..pls help..
Please help me...I'm looking for terminal remote shutdown at HIROSS HPM,can you show me were is the location?
Just remove the bridge 020-366 (M66UA manufactured @2009) and then use a remote dry contact to control it.
wiring diagram
i think that the pass has four digits
Hi All,
I have followed this thread and i have a similar unit. I am trying to find out how to connect to it via a laptop for more control.
Can anyone shed some light around this?