Parameters of SAnyo RCS-TM80BG

Hello all,

I have a question regarding SANYO control panel and outdoor unit :

During normal operation for heating, the outdoor unit has 2 or 3 different 'speed' of compressor/fans.

Is it possible to force the outdoor unit to the low 'speed' ? Via a parameter set on the control panel ?

I measured the current of the outdoor unit, and I had a first step at 8A, after some minutes, it switch to 13A and then max measured at 18A.

For several reasons, I would like to limit the current at 8A.

Thanks for your help.

Manu.

You have quoted the reference model number of the remote controller, we need to know the model number for the indoor and mostly the outdoor unit.

Hello, thanks of your reply.

The outdoor model is a Winverter 484 from Airpac (climastar). But It is a Sanyo 42,000 BTU with 2 fans.

Indoor unit is a specific unit from Airpac to use it as a Heating Pump Air/water. The indoor unit has a similar control card than indoor units for cooling.

Hope it can help you...

Thanks.