Hi guys
I'm not really worked on this kind of unit before. Unit works fine over all however middle tier is only cools to 0 degree while top and bottom -20. Any suggestion. Cheers.
Printable View
Hi guys
I'm not really worked on this kind of unit before. Unit works fine over all however middle tier is only cools to 0 degree while top and bottom -20. Any suggestion. Cheers.
Can't find a lot on these, am assuming that is some form of Maxivision unit.
Where is it located?
What is the ambient temperature where the unit is? (35°C max)
Condenser clean?
Correct clearance around unit.
Is it in warranty?
Thanks for reply Brian, fridge is in shop. Condenser is clean. I already checked clearance.
Have you defrosted unit?
Link has some basic instructions
https://www.wallsrefrigerationsoluti...xivision_1.pdf
I already asked customer to try that as well. I need to re attend next couple of day so looking for suggestions. Thanks.
Is it a twin comp or one comp they are normally on hc the condensors block up and are prone to waxing capillarys