Hi guys. Can i pick your brains i wonder? What i want to know is: can i fit a capillary line if i by pass the receiver to get this unit to work.
Customer with an upright single door freezer (Gastrnorm type) needed new compressor to be fitted as old one gave up the ghost. Fitted an R404 pot but old one was R12 with non adjusting exspansion device. Teddington i think. Cond unit is up on top of the up-right with a liquid receiver. It runs but only pulls down to 12 degrees C. Freezin up after the valve and sounds like its short when its not.:confused: