Samsung E201 Error Help

Require some help with a U200 E201 fault on a Samsung DVM S2.
Outdoor Unit Model: AM140AXVGGR/EU.
Indoor Unit Model: AM071ANMPKH/EU.

I have 6 indoor units and 1 branch box connected to the system.
The outdoor unit as been programmed to 6 indoor connected and cycles through the address on the segment display.
Error occurs about 5 mins of operation.

Checked power supply to all indoor units and checked interconnecting voltage.
No visible signs of damage to cable either.
Have noticed that LED 302 is lit on 3 of the units. Unable to find any info on the function of this LED.

Any help would be appreciated.

Quote:

---

Originally Posted by C_HVAC_S

Require some help with a U200 E201 fault on a Samsung DVM S2.
Outdoor Unit Model: AM140AXVGGR/EU.
Indoor Unit Model: AM071ANMPKH/EU.

I have 6 indoor units and 1 branch box connected to the system.
The outdoor unit as been programmed to 6 indoor connected and cycles through the address on the segment display.
Error occurs about 5 mins of operation.
fnaf games
Checked power supply to all indoor units and checked interconnecting voltage.
No visible signs of damage to cable either.
Have noticed that LED 302 is lit on 3 of the units. Unable to find any info on the function of this LED.

Any help would be appreciated.

---

I also wanna know the answer. Any reply?

try this method (on picture),or use s net pro 2 and try to identify which one indoor unit is not communicating(probably bad board)
Attachment 16278

if you don´t have converter and software for samsung read this thread
https://www.refrigeration-engineer.c...it-RJ060F3HXEA