vacuum confusion

hello all
not only new to this site but fairly new to refrigeration. I took the plunge and bought myself some cheap and nasty digital gauges with a built in vacuum gauge. When using the gauge it reads 0 for atmospheric and reduces as the vacuum draws to -762 microns or -1013 millibar. to me this does not corelate. Is it me, can perhaps one of you gents enlighten me. Surley those microns should be torr?

Its just different units of measurement, if I could work out how to post files I would include a conversion chart, I use an analogue Torr gauge as I prefer them to the electronic type.

Cheers

Hi, fusbblood :)

Quote:

---

Originally Posted by fusbblood

hello all
not only new to this site but fairly new to refrigeration. I took the plunge and bought myself some cheap and nasty digital gauges with a built in vacuum gauge. When using the gauge it reads 0 for atmospheric and reduces as the vacuum draws to -762 microns or -1013 millibar. to me this does not corelate. Is it me, can perhaps one of you gents enlighten me. Surley those microns should be torr?

---

welcome to RE forums,

please search forums for "vacuum", "vacuum units" ... and similar words, for sure you will find some good explanation..

or follow those links to find more links within posts;)

http://www.refrigeration-engineer.co...t=vacuum+units

http://www.refrigeration-engineer.co...t=vacuum+units

of course if you try harder you will find more info on RE forums.... good luck ...

Best regards, Josip :)

That must be Refco Digimon!
Give it to your kids as new funny toy.;)

Quote:

---

Originally Posted by El Padre

I use an analogue Torr gauge as I prefer them to the electronic type.

Cheers

---

What analog torr gauge could clearly read 0,5 torr?

In the US we use microns. typically I pull down to 400 microns if this gives you a point of reference.

the original confusion is was the reading of -1013 millibar and -762 micron as being the same pressure reading

I have four kids the youngest is 23
I wouldnt trust him with a new toy :o/

Quote:

---

Originally Posted by fusbblood

the original confusion is was the reading of -1013 millibar and -762 micron as being the same pressure reading

I have four kids the youngest is 23
I wouldnt trust him with a new toy :o/

---

You mean -762 Torr?

1013 mbar is 759,81 Torr!

thats what I thought but litterature and decal on gauge says micron!
Back on ebay me thinks!!

Than search for Digicool!
And buy vacuum gauge separately.

just found how to add a signature
and the edit button

off to do some work now on nights

762 microns is 1,01592mbar
prefix - is probably there to indicate pressure below atmosphere!
But then again -1013 mbar mean that vacuum is down to 0,25 mbar absolute or 187,52 microns.
So, it remain unclear which is it, 762 microns or 187,52 microns.