Quote:
EVAP-COND v2.2.1
This simulation package, developed by the National Institute of Standards and Technology (NIST), contains EVAP and COND, simulation models for predicting performance of air-to-refrigerant finned-tube evaporators and condensers. The models were prepared by:
Piotr A. Domanski
Building and Fire Research Laboratory
National Institute of Standards and Technology
Gaithersburg, MD 20899-8631
The modeling methods applied in EVAP and COND are in part reported in the following publications:
Domanski, P.A., 1999, "Finned-Tube Evaporator Model With a Visual Interface," Proceedings of 20th Int. Congress of Refrigeration, Sydney, Australia, September 19-24, 1999, International Institute of Refrigeration, Paris.
Domanski, P.A., 1991, Simulation of an Evaporator with Nonuniform One Dimensional Air Distribution, ASHRAE Transactions, Paper No. NY-91-13-1, Vol. 97, Part 1.
Domanski, P.A. and Didion, D.A., 1984, Mathematical Model of an Air-to-Air Heat Pumps Equipped with a Capillary Tube," International Journal of Refrigeration, Vol. 7, No. 4, pp. 249-255.
The visual interface was written by:
Janusz Wnek
ITEC Information Technology Consulting
6 Stonebridge Court
Germantown, MD 20874
Ryszard S. Michalski
INIS Inc.
9711 Maury Road
Fairfax, VA 22032
Development of this simulation package was supported by the National Institute of Standards and Technology, the U.S. Department of Energy, and the Air-Conditioning and Refrigeration Technology Institute.
Janusz Wnek provided the main upgrades to Version 2 with further modifications by Ben McIlwain of NIST.