});


  • Google ..

  • Google Content

  • RE_Calendar

    January   2019
    Su Mo Tu We Th Fr Sa
    1 2 3 4 5
    6 7 8 9 10 11 12
    13 14 15 16 17 18 19
    20 21 22 23 24 25 26
    27 28 29 30 31
  • ? about hydrocarbon gas

    i am thinking about starting to learning a bit about hydrocarbon gases to save money. can any one tell me what the difference between r290a and lpg is . can any one tell me why u cant just use pure lpg in a fridge all u would need is a pt chart for it. does lpg have more moister in it
    because from what i can work out it seems to work fine we tried it in a domestic fridge and ran fine for 4 years
    This article was originally published in forum thread: ? about hydrocarbon gas started by iceberg1988 View original post
    Comments 3 Comments
    1. chillerman2006's Avatar
      chillerman2006 -
      R290 is a CLEAN refrigerant

      lpg ect is dirty, moisture and non condensables and foreign bodies

      also regrigerant grade hydrocarbons are stenchless/no smell

      as the stenching agent is absorbed by drier cores

      would say you got lucky with your domestic

      R's chillerman
    1. chillerman2006's Avatar
      chillerman2006 -
      waste of thread

      have replied to your article

      R's chillerman
    1. chillerman2006's Avatar
      chillerman2006 -
      have now found you have had all the answers here

      http://www.refrigeration-engineer.co...ydrocarbon-gas

      and these dont change by reposting the same question

      thread should be deleted really

      R's chillerman
  • Recent Forum Posts

    chillermac

    Re: Clivet Chiller

    Hi Guys, still haven’t got back to this chiller. Waiting on parts.
    But I have another error on an identical model as above.
    E126 SPI

    chillermac 17-01-2019, 04:31 PM Go to last post
    AlexLPD

    Re: Best way to reach 450Psi for leak test?

    Yes I think it is feasible, but my main concern is to get an pressure test above the normal compressor ratio, for the read it is recommended to be 1.43

    AlexLPD 16-01-2019, 04:21 PM Go to last post
    knighty

    Re: Best way to reach 450Psi for leak test?

    can you not feed in on the low pressure side and use the compressor to suck the OFN in and pressurise it?

    I did that once when I was running

    knighty 15-01-2019, 10:24 AM Go to last post
    Rob White

    Re: Best way to reach 450Psi for leak test?

    .

    As well as refrigeration I also dabble in diving, scuba diving.

    We use booster compressor's to increase O2 (oxygen) in

    Rob White 12-01-2019, 11:58 AM Go to last post
    al

    Re: Cosmotec enclosure cooling unit fault P1

    Check that there isn't a door switch keeping unit off, P1 is normally the probe alright, i suppose you could jumper out the stat to test the compressor.

    al 11-01-2019, 08:57 PM Go to last post