PDA

View Full Version : pipe sizeing tool







Latte
09-01-2003, 11:12 PM
anyone know where you can get the flat metal tools for sizeing up pipework. HRP & NRS used to keep them but no longer do.
they were a lot easier to see what pipe the pipe size of something was instead of trying to measure it or carry lots of small lengths of pipe

Dan
11-01-2003, 04:48 AM
Try blindfolding yourself. Then pick up pieces of pipe and guess what sizes they are. It shouldn't take long, and you will never need a tool other than your hands.

phil.knowles
12-01-2003, 11:47 AM
NRS have got them on there web site at 95 pence:)

Peter_1
13-11-2003, 10:21 PM
Can you post a picture of those tools because i never heard of those before?
What is exactly the purpose of it?

Argus
13-11-2003, 11:12 PM
It is a gauge that measures the outer diameter of the pipe against a graduated scale.

Dan is right - with experience you soon get to know the sizes by looking at them.

It is a little more difficult when dealing with capillary tubes, but I use to have a small vernier calliper for those occasions.
________
extreme q (http://extremevaporizer.info)

norcool
10-12-2003, 11:32 PM
hello !Have you ever been using
the CoolPack free download from the danish university ,I think thar software is good.use altavista and search for CoolPack.Haave a nice day!
G.lohse