PDA

View Full Version : how to diagnose realy fault







rossaim
08-10-2007, 08:21 PM
hi
I have a fault with a compressor not starting,windings check out fine. relay just clicks, any advise on how to check if relay or compressor at fault. model bm20 aprox 4yrs old



thanks rossaim

Lowrider
08-10-2007, 10:10 PM
Back to basic then?

If the realy just clicks, does it stay on?

Have you checked, if present, if the fuses are ok?

kelvin kline
08-10-2007, 10:58 PM
remove electrics and connect an Annie...check run amps.

or, remove the relay, put continuity meter across both pin holes and invert it, should make circuit and break when turned back the right way up.if no circuit, relay contacts are shot.

fit solid state relay to test ...then order new relay if needed.

rossaim
08-10-2007, 11:44 PM
sorry guys
i said relay when i meant p.t.c. start device