PDA

View Full Version : Fast learning servisman



bozicaleksandar
08-10-2007, 01:49 PM
Hello,
Thaks to the Brian_UK and Taz24 I will learn a lot.
But I have a question for Brian_UK.
In preview post Brian_UK explain me how the use charging cylinders wit single composition gases,
(I realise that charging cylinder for R410a hasn't got),
but what about charging cylinder for R407C gas.Is the same charging procedure(with charging cylinder for R407c)?
And
-How and where to measure subcooling?
I have many questions....
Thank you!!!!!!!
Aleksandar

BigJon3475
08-10-2007, 05:31 PM
Links (http://wwwebworks.com/ht/fyi/Jim_Wheeler_Charging.htm)
Links 1 (http://www.udarrell.com/ac-trouble-shooting-chart.html)
And more Links (http://www.hvac.amickracing.com/)

Just about everything you need is in these links. Tons of info read over them all carefully.

Brian_UK
08-10-2007, 09:34 PM
Good set of links there Jon, thanks

bozicaleksandar
08-10-2007, 11:42 PM
Thank you BigJon3475.
I hope that you will answer me for my questions in
future,thank you again!