Ammonia Plant

[kevinxt]

We are currently back engineering a Plant working on Ammonia after a Fire. The HSE are involved and we have been questioned regarding our water neutralisation method for small service jobs such as checking/ repairing Danfos PM Valves.

Has anyone out there come across a small recovery set similar to that used on *****s and the like.

Just a thought.

[Quality]

A small portable (***** type) recovery / transfer unit for liquid and vapour nh3 is avaiable from Polar in doncaster england on this number : - 01302 751 253

[taz24]

A small portable (***** type) recovery / transfer unit for liquid and vapour nh3 is avaiable from Polar in doncaster england on this number : - 01302 751 253


I have personaly seen these units, they are fully automatic and exelent build quality.
I also saw the pump broken down into its basic components and the quality is exelent.

taz.

[US Iceman]

...we have been questioned regarding our water neutralisation method for small service jobs such as checking/ repairing Danfos PM Valves.


What type of questions were raised? This is a common practice and has been for quite some time. If you can share some of the their concerns I'm sure others would be interested.

[Brian_UK]

I'm not sure whether there will be any response from Kevinxt.

His last post, above, was almost 4 years ago so he doesn't seem a regular visitor I'm afraid. :)

[US Iceman]

Right you are Brian. Just goes to show a person should read all of the information, not just part of it.:o

[NH3LVR]

Do we have a make and Model Number available for these recovery machines? Those of us on the other side of the might have a use for them.:)

[Quality]

Yes the Recovery / transfer machine Is A Polar Pumps Model OLE70 nh3 (oiless/electric 70Kg per hour Liquid 25Kg Vapour) Maintainance free, Auto Reset Hi Pressure cut out and dual voltage as standard also 15Kg Gross Weight. Simple to use I.E. in - out- On - Off Contact Them on Tel :01302 751 253
Fax: 01302 751 254:)

[Brian_UK]

Yes the Recovery / transfer machine Is A Polar Pumps Model OLE70 nh3 (oiless/electric 70Kg per hour Liquid 25Kg Vapour) Maintainance free, Auto Reset Hi Pressure cut out and dual voltage as standard also 15Kg Gross Weight. Simple to use I.E. in - out- On - Off Contact Them on Tel :01302 751 253
Fax: 01302 751 254:)I'm sorry Quality but I don't see any mention of NH3 on the Polar website for their recovery machines, the OLE70 is for Fluorocarbons.

[Quality]

the ole 70 nh3 is a development within the last 3 years and the web site is ancient so yes the OLE 70 is for ammonia liquid and vapour thank you:)